Piling Systems
One firm for every kind of pile. Foundation Masters designs, manufactures, drives, drills, tests, sells, and rents the full range of piling systems, from our own proprietary pipe pile line and deep foundation methods to steel sheet piling for seawalls, cofferdams, and retaining walls. This is the complete lineup, all in one place.
Florida’s Longest-Running Foundation Repair & Structural Engineering Firm
For more than 25 years, Foundation Masters has designed, engineered, and installed foundation repair, underpinning, deep foundation, waterproofing, and structural stabilization systems. As Florida’s longest-running foundation repair company under continuous ownership, Foundation Masters continues to provide engineered solutions backed by decades of field experience, documented project performance, and proprietary foundation systems developed specifically for Florida conditions.
Deep Foundation Methods
Jump straight to any pile method. Each one suits different soils, loads, access, and structures, coordinated so design decisions stay consistent across the project.
The core pile methods we engineer and install. Every one is verified by load testing and documented in a signed and sealed engineering report.
Pipe Pile
SteelOur engineered, manufactured, and installed steel pipe pile line, the hub for all five FM pile systems.
ExploreDrilled Shafts
Cast-in-placeLarge-diameter cast-in-place concrete shafts (caissons) for bridges, high-rise, and heavy loads.
ExploreMicropiles
Drilled & groutedSmall-diameter, high-capacity piles for underpinning, tight access, and Florida karst.
ExploreConcrete Piles
Driven precastPrecast, prestressed concrete piles for coastal, bridge, and heavy structural foundations.
ExploreHelical Piers
Torque-verifiedScrewed-in piers with capacity verified by installation torque, quick and low-vibration.
ExplorePush Piers
UnderpinningHydraulically driven piers that transfer settlement loads to deep bearing strata.
ExploreTimber Pilings
MarineTraditional timber piles for docks, boardwalks, and light marine and coastal structures.
ExplorePile Driving
InstallationOur in-house pile driving crews and rigs install driven piles across Florida and the Southeast.
ExploreDeep Foundation Systems
HubThe overview of how our deep foundation methods are selected and combined on a project.
ExploreOur own engineered pipe pile and push pier systems, manufactured in-house and load-rated from 20 tons to 100 tons. These designs belong to Foundation Masters.
FMPP25 Push Pier
20 tonCompact push pier system for settlement repair and residential underpinning.
View systemFM-PP30 Pipe Pile
30 tonOur workhorse pipe pile for residential, commercial, marine, and bridge applications.
View systemFMPP30-FS Weak Soil
30 ton • FSFin-stabilized version of the FM-PP30 for soft clays, loose sands, and variable soils.
View systemFMPP45 Pipe Pile
45 tonHigher-capacity pipe pile for heavier commercial and structural loads.
View systemFMPP100 Pipe Pile
100 tonOur highest-capacity pipe pile system for the heaviest deep foundation demands.
View systemSteel Piling Contractor
H • Pipe • TubularFull steel piling services: H-piles, pipe piles, and tubular piles, engineered and installed.
ExploreThe complete sheet pile business: we engineer and install it, we sell and rent new and used sheets, and we will even buy your surplus sheets back.
Sheet Piling Contractors
InstallEngineering and installation of steel and vinyl sheet piling for walls, cofferdams, and waterfronts.
ExploreSteel Sheet Piles for Sale
Sell • RentNew and used PZ, PZC, AZ, and NZ sheet pile sections for sale and for rent from our inventory.
ExploreSell Your Sheet Piles
We buyHave surplus sheet piles? We market and sell them for you and connect you with buyers.
ExploreCofferdams
EnclosureSheet-pile cofferdams that dewater and enclose in-water and below-grade work zones.
ExploreSeawall Contractor
WaterfrontEngineered seawalls and shoreline protection built on steel and vinyl sheet piling.
ExploreRetaining Walls
Earth retentionSheet-pile and engineered retaining walls for grade changes, excavations, and slopes.
ExploreThe engineering behind the piles: soil investigation, limestone drilling, and the load testing that proves every system before it is accepted.
Soil Borings
Geotech inputSubsurface investigation and soil borings that drive pile type, depth, and capacity decisions.
ExploreLimestone Drilling
Pre-drillDrilling through Florida limestone to set, socket, and seat piles where driving alone cannot.
ExploreGeotechnical Engineering
DesignThe geotechnical analysis that turns soil data into a safe, code-compliant pile design.
ExploreEvery Pile, Proven by Load Testing
Capacity is proven, not assumed. Across all of our piling systems we verify performance with static, bi-directional, tension, and lateral load tests, plus integrity testing on cast-in-place shafts, then document the results in a signed and sealed engineering report before the piles are accepted.
Piling Systems FAQs
What piling systems does Foundation Masters offer?
Foundation Masters offers the full range: steel pipe piles (our proprietary FM-PP25 through FMPP100 systems), driven concrete piles, drilled shafts, micropiles, helical piers, push piers, timber pilings, and steel sheet piling for seawalls, cofferdams, and retaining walls, all engineered, installed, and load-tested in-house.
Do you sell and rent sheet piles, or only install them?
Both. We engineer and install sheet piling, we sell and rent new and used steel sheet pile sections from our inventory, and we will also market and sell your surplus sheet piles for you.
Which pile system is right for my project?
It depends on your loads, soils, access, and structure. Light-to-moderate residential loads often suit helical or push piers; heavy and coastal structures suit pipe piles, concrete piles, or drilled shafts; tight-access underpinning suits micropiles; and waterfronts and excavations use sheet piling. We confirm the choice with soil borings and engineering.
Are your pipe pile systems proprietary?
Yes. The FM-PP25, FM-PP30, FMPP30-FS, FMPP45, and FMPP100 are Foundation Masters’ own engineered and manufactured pile systems, load-rated from 20 tons to 100 tons for different soils and structures.
How is pile capacity verified?
By load testing. Depending on the pile type we perform static, bi-directional (Osterberg cell), tension, and lateral load tests, plus integrity testing such as Crosshole Sonic Logging on cast-in-place shafts, with results documented in a signed and sealed engineering report.
Do you design and install, or just one?
Both. Foundation Masters is a design-build firm. We engineer the foundation, manufacture our proprietary systems, install with our own crews and rigs, and test the result, coordinated from soil borings through final acceptance. Request an engineering review to get started.